Outdoor Intelligent MPPT Patent Controller 300W wind turbine Solar Hybrid System 30W 40W 50W 60W 70W 80WLED Street Light
Product description:
Based on smart solar street light, the F series is a new model which can utilize the natural
resources - wind energy & solar energy better.
With wind turbine system, this solar led street lamp can be charged daytime and nighttime whenever there is wind,
which can widen the applications, also to meet the Philosophy of our company - Satety, Eco-friendly
and Intelligence.
| Model: RYGH-F-50 |
| LED Power | 12V 50W, Bridgelux 45ML
Lumens: 5500-6000LM
LED Angle: 70*140 degree Color temperature: 6000-6500K |
| Solar Panel | 18V 48W High Efficiency Monocrystalline;
more than 25 years warranty |
| Wind turbine | 24V 300W wind turbine with 10 years lifespan |
| Battery | Lithium powerful battery 12V 33.6AH;
5 to 8 years lifespan |
| PIR Sensor | YES |
| Controller | Intelligent MPPT patent controller;
High conversion efficiency 97% |
| Materials | Die-casting Aluminum + Tempered Glass + Integrated Optical lens |
| Install Height | 6 to 8 meters |
| Pole Distance | 20 to 25 meters |
| Solar Charging Time | 6 to 7 hours by bright sunlight |
| Working Temperature | -30° to 65° |
| Product Size | 1290*340*45mm for light head Diameter 1440mm for wind turbine |
| Discharge Time | 7 to 10 days backup |
| Warranty | 3 years |
| IP Grade | IP65 |
(1) Operation principleData sheet:
(2) Function introduction
Using the ARM32 MCU as the main control chip, the whole system can achieve the perfect combination
of PV generation module, wind turbine module, BESS and LED lighting module, also can be controlled
by smarphone APP remotely, to provide a better user experience
Features as below:
① Wind turbine module
Starts non loaded: Minimum speed is 2m/s to start the wind turbine.
Electronic braking system: Braking system will turn on automatically when wind speed ≥ 35m/s.
Discharging while charging: At night, the wind turbine workes to support the LED lighting and also
charge the battery.
Read the data: Read the data of wind turbine in real-time by smartphone APP.
② PV generation module
Daytime and nighttime will be recognized according to the output voltage of solar panel. When nightfall, the
LED lighting operates; when daytime, charge the battery.
With MPPT technology, the battery will be charged max by the sunlight.
Read the data: Read the data of PV module in real-time by smartphone APP.
③ LED lighting module
Utilize ligh effiency LED, with integrated optical lens.
PWM adjustment, constant current output.
PIR motion sensor: enter energy-saving mode when nobody to prolong backup days.
With RED pathway indicator, for warning effect and decoration at night.
(Can ajust the brightness and time of switch-on/off by smartphone APP)
④ Battery energy storage system
The storage of lithium battery pack can be customized:
Inside there is a cell baffle to protect the battery, NTC temperature sensor and heater band.
Real-time detection of the voltage and currency to avoid the overcharging, overdischarging and
overcurrent.
Real-time detection of battery temperature to start the battery heating when extremely low
temperature, and stop heating when up to 10 degrees.
(Also can monitor the battery data by smartphone APP)
⑤ Bluetooth communication module
Support troubleshooting, read light data and control the light switch on/off
by smartphone bluetooth APP.
Production proccess:
Product Application:
Maintenance and Warranty
(1) Maintenance
After the first month and later every 6 monthes:
Clean up the solar panel to avoid the hot-spot phenomenon, which may affect the charging efficiency.
Check the light head and pole connected firmly.
Check the blade, replace the damaged or unbalanced, or it will lead serious result. Don't replace the
blade by piece as the blades group are under balance test integratedly.
Check the blade screws and blade plate screws fasten.
Check the fairing cap unbroken and connected in right way.
Clean up the dirty on the blade.
Check the all the connected parts fasten and without corrosion.
We advise you replace the blades every 5 years.
(2) Warranty
Product Warranty: 3 years warranty
Disclaimer Declaration:
We shall not be responsible or liable for failure to perform all or any portion of this specification due to
earthquake, flood, thunder or other natural hazards, and fire disaster which not caused by our product.
We shall not be responsible for damage and loss casued by any unforeseen events such as theft, traffic
accidents.
We shall not be responsible for loss which not complied with this product manual we shall not be
responsible for loss which caused by use in conjunction with irrelevant our products.
